Tag Archives: field weekend

SNBCG and LEFARS Big Radio Weekend

The August bank holiday provided a great time to play some radio, and join forces with another club for the weekend. Many of team SNBCG are also members LEFARS, and with an active portable group, this was set to be a busy weekend.

I arrived on Friday evening with Peter G0IPA and Dave G7UVW to setup the initial masts, we put up the 144 MHz beam  (9e + mast head LNA).

The 18 MHz 3e beam was recently constructed and required some further testing, although initial results were very promising.

The 7 MHz vertical was constructed from push up poles and 8 radials.

A BBQ was planned for Saturday evening, with Ron G6LTT, Karen and Sharon doing a great job in feeding the masses. Dave M0MBD also provided a very nice Chili con carne with rice. We also had burgers and sausages and some salad, a really nice and very welcome meal. The weather was excellent, with temperatures getting to 27c in the day, and not falling below 18 in the evenings and ideal for camping. The turn out from both clubs was excellent with members travelling from far and wide to partake.

A WSPR transmitter was setup for the weekend using the QRP Labs with a 200mW output into some wire. This provided an indication of the band conditions and was active throughout the weekend.

John M0IDA dropped in on Sunday with his arrow satellite antenna and provided a demonstration on working through satellites.

Altogether a very successful weekend with members operating on 3.5, 7, 10,14, 18, 21, 24,50 and 145 MHz over the weekend, making close on 1,000 QSO in 80 countries.

Further pictures from the weekend are available here.

Easter Field Weekend

During the long Easter weekend members of the SNBCG came together for a radio weekend. Over the course of the four days, two HF stations were set up; one on 7 MHz and the other roaming between 1.8 and 28 MHz depending on propagation.

Dave M0TAZ decided he would try a 1/4 wave vertical on 7 MHz and use his recently purchased push-together fibreglass poles. These poles are often sold at radio rallies in packs of 5 (each pole 1.3 metres) to give an overall height of 6.5 meters. Using two packs of the poles, the required height of 10 metres was achieved.

Chris G8OCV had made some supporting guy rings, these provided anchor points for the guy lines at approximately 4 and 8 meters. The first attempt didn’t quite go to plan, it simply wasn’t possible to walk up the 10m pole, as we found out when we exceed the bend radius of one of the poles. Lesson learned it didn’t make any difference as the fracture was in the joining section that was simply moved to the first section. In the end, we used 9 poles, giving us a total height of 11 meters with a simple wire running down the side for the radiator.

Six 6 radials were cut, each around 10 meters in length, and the antenna was mounted at the base of a wire fence. The earthing system included the 6 radials and the wire fence, and this provided a reasonable match around 1.5:1 at 7.150 MHz. It would have been much easier to use a push-up fishing/roach style pole but experience has taught Dave that these can be tricky to keep up without guying and tapeing over the joints. As we wanted to run linear amplifiers this weekend, the prospect of the pole moving in the wind and/or falling down made, we made up our minds to use push together poles as the first choice. The antenna was fed with coax with a choke unun (or balun) at its base to stop the coax radiating, and this needed to be capable of high power.

The antenna provided reliable service all weekend, and with the addition of 400W yielded over 200 contacts in 40 DXCC countries. An enjoyable part of the weekend was working DX stations later in the evenings, including the USA, Chile, Mozambique, Guinea-Bissau, Israel, UAE, Armenia and Asiatic Russia all on the 40 metre vertical.

DXCC Breakdown on 40 metre vertical

George M1GEO, Fred G3SVK and others operated the other station. George chased some good DX and Fred worked several hundred stations as “GB0SNB” in CW.

Below we see the DXCC breakdown of the second station using the mast doublet on 160 and 80 metres, and the beam (pictured above) on the higher bands. Some of the DX on the doublet and beam included several QSOs into Japan, Fiji, Trinidad, Guinea-Bissau, Cayman Islands and Argentina.

DXCC Breakdown on 160m doublet and HF beam

We also had time for a BBQ and some excellent curries provided by Fred G3SVK. It was nice to see Camb Hams members Geoff G0DDX and Linda G0TPX, and LEFARS members Derek M0XDC, Dave M0MBD and Dave M0VID. RSGB regional man Peter G0DZB also joined us for the afternoon, making the most of the good weather for a ride on his motorbike, and Bill G0IQK popped in on the Sunday afternoon.

Dave M0YOL worked some data modes using his portable setup. All in all, a good weekend was had by all.